The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ISO | Specification for Carbon and Low Alloy Steel Elect | 1 | 671.52 A511 No. A5.25-91 | |||
AWS | Structural Welding Code Steel | 1 | 671.51 A511 No. D1.1-84 | |||
ANSI | Specifications for Credit Cards | 1971 | ANSI X4.13 | |||
ANSI | Preferred Limits and Fits for Cylindrical Ports (R | 1967 | ANSI B4.1 | |||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 671.52 A511 No. A4.2-91 | |||
ANSI/SAE/AMS | Nickel Alloy, Corrosion and Heat-Resistant, Bars, | ANSI/SAE/AMS 5662M | ||||
ANSI/ASQC | Quality Systems – Model for Quality Assurance in D | 1987 | ANSI/ASQC Q91 | |||
AWS | Local Heat Treatment of Welds in Piping and Tubing | 1 | 1975 | 671.51 A511 No. D10.10-75 | ||
ANSI/ASME | Refrigeration Piping | 1987 | ANSI/ASME B31.5 | |||
AWS | Recommended Practices for Automotive Weld Quality | 1 | 1988 | 671.52 A511 No. D8.7-88 | ||
ANSI/IEEE | IEEE Standard Letter Symbols for Units of Measurem | ANSI/IEEE 260 | ||||
ANSI/ASME | Large Diameter Steel Flanges NPS 26 Through NPS 60 | 1 | 2006 | ANSI/ASME B16.47 | ||
ANSI/ASME | Addenda to ANSI/ASME B56.8 – 1993 Safety Standard | ANSI/ASME B56.8a | ||||
ANSI/ISO/IEC | General Requirements for the Competence of Testing | 1999 | ANSI/ISO/IEC 17025 | |||
ANSI/ASME | Slings | 1 | 2010 | ANSI/ASME B30.9-2010 | ||
ANSI/IEEE | IEEE Standard for Programmed Inquiry, Learning, o | 1991 | ANSI/IEEE 1154 | |||
ANSI/ASME | Addenda to ANSI/ASME B30.16 - 1987 Overhead Hoists | 1990 | ANSI/ASME B30.16b | |||
ANSI/ASME | Acme Screw Threads (R2004) | 1997 | ANSI/ASME B1.5 | |||
ANSI/ASME | Valves-Flanged Threaded and Welding End | ANSI/ASME B16.34-2009 | ||||
ANSI/SAE/AS | Nut, Fitting, Bulkhead | ANSI/SAE/AS 5178A | ||||
ANSI/ASME | Safety Code for Elevators and Escalators | ANSI/ASME A17.1 | ||||
ANSI | Relief Valves and Automatic Gas Shutoff Devices fo | ANSI Z21.22 | ||||
AWS | Guide for Steel Hull Welding | 1 | 671.52 A511 No. D3.5-76 | |||
AWS | Structural Welding Code - Sheet Steel | 1 | 671.52 A511 No. D1.3-98 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1996 | 671.52 A511 B2.1-1-202-96 | ||
AWS | Specification for Carbon and Low Alloy Steel Rods | 1 | 2007 | 671.51 A511 No. A5.2/A5.2M-2007 | ||
ANSI | Safety Requirements for Wood Splitting Wedges | ANSI B209.3 | ||||
NEMA | Performance Measurements of Gamma Cameras | NU 1 - 2007 | ||||
ANSI/ASME | Power Piping | ANSI/ASME B31.1 | ||||
ANSI/UL | Panelboards | ANSI/UL 67 | ||||
ANSI/NSF | Drinking Water System Components Health Effects | ANSI/NSF 61 | ||||
AWS | Specification for Bare Aluminum and Aluminum Alloy | 1 | 671.52 A511 No. A5.10-88 | |||
AWS | Recommended Practices for Welding of Chromium-Moly | 1 | 671.51 A511 No. D10.8-78 | |||
ANSI | Safety Color Code for Marking Physical Hazards | 1979 | ANSI Z53.1 | |||
ANSI | Requirements for Salient-Pole Synchronous Generato | 1982 | ANSI C50.12 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 671.52 A511 No. B2.1.011-91 | |||
ANSI | Construction and Demolition Operations – Safety an | 1992 | ANSI A10.33 | |||
ANSI/ASME | Addenda to ANSI/ASME B56.1 – 1993 Safety Standard | 1995 | ANSI/ASME B56.1a | |||
AWS | Operator's Manual for Oxyfuel Gas Cutting | 1 | 1978 | 671.52 A511 No. C4.2-78 | ||
ANSI/ASME | Addenda to ANSI/ASME B31.1 – 1995 Power Piping | 1995 | ANSI/ASME B31.1a | |||
ANSI/ISO | Amendment 1—General Purpose Flat Pallets for Throu | ANSI/ISO 6780 | ||||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Fin | ANSI/ASQC Q9003 | ||||
ANSI/ASHRAE | Method of Testing the Performance of Cool Storage | 2000 | ANSI/ASHRAE 150-2000 | |||
ANSI/ISO | Quality Management – Guidelines for Configuration | 1995 | ANSI/ISO 10007 | |||
ANSI/AWWA | Underground Installation of Polyvinyl Chloride (PV | 1994 | ANSI/AWWA C605 | |||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 2001 | ANSI/ASME B30.2 | |||
ANSI/ASCE | Minimum Design Loads for Buildings and Other Struc | 2 | 1998 | ANSI/ASCE 7 | ||
ANSI/UL | Chimneys, Factory-Built, Residential Type and Buil | 1994 | ANSI/UL 103 | |||
ANSI/NFOPA | Design Values for Wood Construction Supplement | 1991 | ANSI/NFOPA NDS | |||
ANSI/ASME | Addenda to ANSI/ASME B16.5 – 1996 Pipe Flanges and | ANSI/ASME B16.5a |