The Central Library’s Research Center orders selected new and revised print standards coordinated and accredited by the American National Standards Institute (ANSI).
Varying alphanumeric document numbers on each ANSI standard differentiate publishing organizations as well as titles (ex. ANSI/ASME). These standards are shelved alphabetically by organization and then numerically within our Standards and Specifications Vertical Files. Some standards are classified by Dewey Decimal Number in the Research Center book stacks (Ex: American Petroleum Institute).
Within copyright restrictions, photocopiers are available for copying. Emailing and scanning are possible at 10 pages per day. At the library’s discretion, check-out privileges are for Tulsa City-County Library customers with a valid library card and proper business identification. (The documents are to be used for business use.)
Other full or partial standards in the Research Center Collection include:
American Concrete Institute (ACI)
American Petroleum Institute (API)
American Society for Non-Destructive Testing
American Society of Mechanical Engineers. Boiler and Pressure Vessel Code
American Society for Testing and Materials (ASTM)
American Welding Society (AWS)
Building Official and Code Administrators (BOCA)
International Code Council (ICC)
National Fire Protection Association (NFPA)
For more information on specific standards, contact Central Library’s AskUs Hotline at (918) 549-7323, or email askus at tulsalibrary dot org.
Organization | Title | Number | Year | Edition Sort descending | Call Number | Notes |
---|---|---|---|---|---|---|
ANSI | Ductile Iron Pipe, Centrifugally Cast, for Gas | 1991 | ANSI A21.52 | |||
AWS | Standard Procedures for Calibrating Magnetic Instr | 1 | 1974 | 671.52 A511 No. A4.2-74 | ||
AWS | Specification for Welding Shielding Gases | 1 | 1997 | 671.52 A511 No. A5.32/A5.32M-97 | ||
ANSI/ASME | Personnel Hoists and Employee Elevators on Constru | 1 | ANSI/ASME A10.4-2007 | |||
ANSI/SAE/AMS | Inspection Material, Penetrant | ANSI/SAE/AMS 2644D | ||||
ANSI | Safety Color Code for Marking Physical Hazards | 1979 | ANSI Z53.1 | |||
ANSI | Requirements for Salient-Pole Synchronous Generato | 1982 | ANSI C50.12 | |||
ANSI/ASME | Floating Cranes and Floating Derricks | 2004 | ANSI/ASME B30.8 | |||
AWS | Specification for Welding Earthmoving and Construc | 1 | 2000 | 671.52 A511 No. D14.3/D14.3M-2000 | ||
ANSI/ASHRAE/IESNA | Energy Standard for Buildings Except Low-Rise Resi | 2 | 2001 | ANSI/ASHRAE/IESNA 90.1 | ||
ANSI/ASHRAE | Designation and Safety Classification of Refrigera | 1 | 2010 | ANSI/ASHRAE 34a-o-2010 | ||
ANSI | Control Valve Seat Leakage | ANSI B16.104 | ||||
AWS | Recommended Practices for Test Methods for Evaluat | 1 | 671.52 A511 No. D8.9-97 | |||
ANSI/ASME | Overhead and Gantry Cranes (Top Running Bridge, Si | 1 | ANSI/ASME B30.2 – 2005 | |||
ANSI/ISO | Amendment 1—General Purpose Flat Pallets for Throu | ANSI/ISO 6780 | ||||
ANSI/ASQC | Quality Systems-Model for Quality Assurance in Fin | ANSI/ASQC Q9003 | ||||
ANSI/ISO | Quality Management – Guidelines for Configuration | 1995 | ANSI/ISO 10007 | |||
ANSI/AWWA | Underground Installation of Polyvinyl Chloride (PV | 1994 | ANSI/AWWA C605 | |||
ANSI/ASME | Addenda to ANSI/ASME B16.5 – 1996 Pipe Flanges and | ANSI/ASME B16.5a | ||||
ANSI | Accepted Practices for Hydrogen Sulfide Safety Tra | ANSI Z390.1 | ||||
ANSI/ASME | Slurry Transportation Piping Systems | 1989 | ANSI/ASME B31.11 | |||
AWS | Local Heat Treatment of Welds in Piping and Tubing | 1 | 1975 | 671.51 A511 No. D10.10-75 | ||
ANSI/ASME | Addenda to Power Piping | 1989 | ANSI/ASME B31.1a | |||
AWS | Recommended Practices for Automotive Weld Quality | 1 | 1988 | 671.52 A511 No. D8.7-88 | ||
AWS | Specification for Carbon Steel Electrodes for Shie | 1 | 671.51 A511 No. A5.1-91 | |||
ANSI/ASME | Addenda to ANSI/ASME B31.5 – 1987 Refrigeration Pi | ANSI/ASME B31.5c | ||||
ANSI/ASME | Addenda to ANSI/ASME B30.16 – 1987 Overhead Hoists | ANSI/ASME B30.16a | ||||
API | Review of Air Toxics Emission Calculations from St | 1 | 665.5028 A51 No. 2525 | |||
ANSI/SAE/AS | Fitting, Tee Standard and Reducer, Flared | ANSI/SAE/AS 1035E | ||||
ANSI/ISO/DIS | Environmental Management – Vocabulary | ANSI/ISO/DIS 14050 | ||||
ANSI/ASSE | Performance Requirements for Temperature Actuated | 2003 | ANSI/ASSE 1017 – 2003 | |||
AWS | Standard Welding Procedure Specification (WPS) for | 1 | 1990 | 671.52 A511 No. B2.1.010-90 | ||
AWS | Standard for AWS Certified Welders | 1 | 1989 | 671.51 A511 No. QC3-89 | ||
ISO | Fitting, Union, Standard and Reducer, Bulkhead, Fl | ANSI/SAE/AS 1007F | ||||
ANSI | Specifications for Credit Cards | 1971 | ANSI X4.13 | |||
ANSI | Preferred Limits and Fits for Cylindrical Ports (R | 1967 | ANSI B4.1 | |||
ANSI/ASME | Pipe Flanges and Flanged Fittings | 1988 | ANSI/ASME B16.5 | |||
ANSI/SAE | Assembly, Installation and Torque for Flareless an | 1 | 2005 | ANSI/SAE AS 5148 –1998(R2005) | ||
ANSI/ASME | Process Piping | 1 | 2012 | ANSI/ASME B31.3 | ||
ANSI | Data Application Identifier Standard | ANSI MH10.8.2 | ||||
ANSI | Ductile Iron Fittings 3 in. through 24 in. for Gas | ANSI A21.14 | ||||
AWS | Recommended Practices for Ultrasonic Inspection of | 1 | 671.52 A511 no. C3.8-90 | |||
AWS | Guide for the Evaluation of Hot Gas, Hot Gas Extru | 1 | 671.52 A511 No. G1.10M-2001 | |||
ANSI/IEEE | IEEE Standard Letter Symbols for Units of Measurem | ANSI/IEEE 260 | ||||
ANSI/ASME | Addenda to ANSI/ASME B56.8 – 1993 Safety Standard | ANSI/ASME B56.8a | ||||
ANSI/ISO/IEC | General Requirements for the Competence of Testing | 1999 | ANSI/ISO/IEC 17025 | |||
ANSI/IEEE | IEEE Standard for Programmed Inquiry, Learning, o | 1991 | ANSI/IEEE 1154 | |||
ANSI/ASME | Safety Code for Elevators and Escalators | ANSI/ASME A17.1 | ||||
ANSI | Relief Valves and Automatic Gas Shutoff Devices fo | ANSI Z21.22 | ||||
ANSI/ASME | Steam Generating Units – Performance Test Code (R1 | 1964 | ANSI/ASME PTC4.1 |